There are very few information about the battery clip on Baidu. Today I will share with you how to connect the battery clip to the battery.
       (1) First, clamp the red wire of the battery clamp start wire on the positive pole of the red battery of the "rescued" vehicle.
       (2) Then clamp the red wire at the other end to the positive pole of the red battery of the "rescue vehicle".
       (3) Clamp the black wire from the battery to the black negative battery of the "rescue".
       (4) Then clamp the black wire on the black negative battery of the "rescue vehicle".
       (5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot be started, please check whether the metal contact part is in poor contact. After starting the engine, you still need to remove the starting wire in order, otherwise it may cause a short circuit.
       The above are the five steps for connecting the battery clip to the stolen battery. I hope it will be helpful to you all.

Previous：How to judge the quality of the battery clamp

Next post：What is the battery clamp industry survey